How to Make a Skateboard Ramp: DIY Ramp Made Easy!

You can actually build a skate ramp in the comforts of your home with your own hands? YES, it’s possible and anyone will be able to do it, provided that you have space and equipment! It doesn’t only add more value to your home, but ramps will definitely help with your skills.

After all, we can’t always go to a skate park and others don’t have access to one in their local area. Instead of making do with some sketchy areas nearby, prepare the space and make your own. So read on as I show you how to make a skateboard ramp!

How to Make a Skateboard Ramp

Learning how to make a skateboard ramp is quite intimidating because of all the construction done. However, you can actually build it yourself as long as you’re devoted to putting your time and effort to it. So follow these steps to begin making the dream skate ramp of yours!

Prepare the Necessary Materials and Tools

Before you begin learning how to make a skateboard ramp, you have to prepare the following materials:

  • 4×8 plywood that has a 3/4-inch thickness
  • 4×8 masonite that has a 1/4-inch thickness
  • One 5/8-inch screw
  • Two 1/2-inch screws
  • 10×4 steel that has a 3/16-inch thickness

Here are the tools you’ll need to prepare, too:

  • Tape measure
  • Pencils
  • Drill
  • Circular saw
  • 3/16-inch drill bit
  • 3/8-inch drill bit

Create the Blueprint

The next step is to create a blueprint according to your space and preferred design. This will give you a gist on what you’ll need to do during construction. Follow these tips to create your blueprint:

  • There are free professional ramp plans online. Avoid getting expensive design software but to consult with friends or professionals who can help you out.
  • Don’t hesitate in having an imaginative design, as long as you can construct it safely! Experimentation is good, but avoid creating without a goal.

Build the Foundations

It’s crucial to build your foundations, even if people overlook them upon construction! There needs to be a connection from the ground to the ramp for safety and to prevent the ramps from breaking down.

However, this depends on your space, as some may not allow permanent ramps or there will be a chance of you moving. Just make sure that the skateboard ramp and ground are connected in a way that it won’t move while it’s in use.

Start With The Sides

When learning how to make a skateboard ramp, you need to understand that the size depends on the space available. If you can, sketch a bigger, life-size model for more accurate measurements when cutting the wood.

Begin doing this with the sides of the ramp. You can cut the two sides from plywood, which should measure about 5’6 feet in length. The back of the ramp should be around 1’6 feet with its height of the front being 1.5 inches.

The Connections

The connections refer to how you piece all the skateboard ramp parts together. Some use two deck screws to do this, then do bracing and place secondary support for more stability. However, this depends on what you have and your personal preference.

Fortunately, the impact of skateboarding isn’t intense, so there are alternatives to connect the parts without risking accidents and the like. You can use screw blocks and/or joint hangers under the horizontal beans, and glue your joints.

Adding Plywood

Applying plywood depends on how big your ramp is. When placing the frame created, one end should cover the entire frame while the other end is touching the ground. Double check your measurements before cutting to ensure it’s the right size for screwing!

Once you’ve made the right measurements, place your screws about an inch apart on the plywood, securing the entire wood. For those making a bigger ramp, you may need more than two pieces of plywood when doing this.

Seal the Ramp

This is the critical step to ensure that your ramp will last long despite the weight you put on it. I highly recommend that you use strong glue made for skateboard ramps, like white glue, which offers decent stability.

When you continue to set up and work on the ramp, stick it with glue. You can even use glue when making the connections, though this is a supplementary tool to ensure that nothing breaks up easily.

Finish Off the Ramp’s Surface

No matter what kind of wood you use, you need to ensure that the material is always protected. Even the strongest and most expensive of wood will be a victim to weather conditions if not properly sealed.

if you’re using plywood and/or masonite, make sure that you use water-resistant paint to seal it and protect the surfaces from rainfall. Polyurethane paint is an inexpensive and effective choice, though if you want better protection, spar urethane is the way to go.

Attaching Steel

Wood won’t touch the ground, so you need to interface sheets of metal for the skateboard wheels to roll smoothly. Make sure to drill the accurate holes on the sheets to attach and secure the steel sheets.

After that, you’re done! Allow the ramp paint to dry and design according to your preferences. Then, you can start skateboarding and practicing your tricks at home, inviting your friends over to play and practice.

Wrapping It Up

Making a skateboard ramp doesn’t need to be so difficult as long as you have the right tools and materials. As you learn how to make a skateboard ramp, you can make even more equipment for your skating needs! Just remember that you have to take account space and time you have for the ramp construction.

Hopefully, this article on how to make a skateboard ramp helped you out! So don’t wait any longer and begin following these steps to construct your ramp now.

If you have any questions or want to share your tips and experiences on building skateboard ramps, comment below. Your thoughts are much appreciated.